The Micro receiver is designed to contain “tiny pets” weighing 1 to 10 pounds.
This receiver is waterproof provided it was not damaged or abused.
The fail safe feature shuts the receiver down 30 seconds after it has been activated. The receiver will reset itself once it has been removed from the signal field for 3 seconds. This feature assures that your pet will not be continuously stimulated if accidently caught in the signal field.
The Micro receiver provides a pulsating stimulus, so that your Dog Guard® professional dealer can adjust the stimulus to match your pet’s temperament.
This receiver can be ordered in the encoded mode or in the non-encoded mode; with or without a one-second delay.
The receiver in the encoded mode is immune to stray signals and provides up to 32 levels of initial stimulation that is controlled at the transmitter. When the pet enters the first signal field, it will receive a warning tone or stimulation. Should the pet stray into the second signal zone, the receiver will automatically increase to a stronger stimulus. The maximum stimulus can be controlled by using shunts.
When ordered with a one-second delay, the pet will receive a one-second audible warning prior to stimulation.
It is available in two frequencies.
Dimension: Width: 1 1/8” • Height: 1” • Length 1 7/8”
Probe Spacing: 1.125”
Weight: 1.8 oz.